Temperature transmitters

Microprocessor based, this sensor-mate PC programmable temperature
transmitter is highly accurate. It accepts a Pt 100 RTD input, is loop-powered and provides a 4-20mA output signal. It can be mounted in
virtually any enclosure or on a wall. An optional digital display provides
indication of process temperature in °F or °C, 0-100% of scale or the 4-
20mA output. The transmitter and display are mounted in a windowed,
explosion-proof enclosure.

• Low cost
• 0.08% accuracy
• Full input-output isolation
• Custom input/linearization capability
• Configurable via a PC or HART Communicator
• T/C Inputs: B, C, D, R, S, E, J, K, L, N, T, U
• RTD inputs: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000 
• mV inputs: -10 to 75mV
• Ohm Inputs: 10 to 2000 ohms
• Outputs: 2-wire, 4-20mA or 20-4mA with optional HART signal superimposed
• Full instruction manual available on request

The 7600D is a highly accurate, PC programmable, microprocessor based temperature transmitter. It accepts a wide range of inputs – RTDs,
thermocouples, resistance and millivolt - loop-powered and provides a
4-20mA output signal. Configure the 7600D with a PC and our software. The slim DIN rail design allows for many transmitters to be mounted in a small area.

• Low cost
• 0.08% accuracy
• Full input-output isolation
• Custom input/linearization capability
• Configurable via a PC or HART Communicator
• T/C Inputs: B, C, D, R, S, E, J, K, L, N, T, U
• RTD inputs: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000
• mV Inputs: -10 to 75mV
• Ohm Inputs: 10 to 2000 ohms
• Outputs: 2-wire, 4-20mA or 20-4mA with optional HART signal
  superimposed

Microprocessor-based, this a highly accurate temperature transmitter accepts a wide range of inputs, is loop powered and provides 4-20mA and HART output signals. Configured through HART Communicator or a PC and software, the 9100H is a DIN Form B design for mounting in a sensor connection head. An optional digital display/meter provides local indication of the process temperature in °F or °C, 0-100% of scale or the 4-20mA output. The transmitter and display are mounted in a windowed, explosion-proof instrument enclosure and can be installed in virtually any
enclosure or on a wall.

• Low cost
• 0.08% accuracy
• Full input-output isolation
• Custom input/linearization capability
• Configurable via a PC or HART Communicator
• T/C Inputs: B, C, D, R, S, E, J, K, L, N, T, U
• RTD inputs: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000
• mV Inputs: -10 to 75mV
• Ohm Inputs: 10 to 2000 ohms
• Outputs: 2-wire, 4-20mA or 20-4mA with optional HART signal superimposed
• Full instruction manual available on request

The 7600D is a highly accurate, PC programmable, microprocessor based temperature transmitter. It accepts a wide range of inputs – RTDs, thermocouples, resistance and millivolt - loop-powered and provides a 4-20mA output signal. Configure the 7600D with a PC and our software. The slim DIN rail design allows for many transmitters to be mounted in a small area.

• Low cost
• 0.08% accuracy
• Full input-output isolation
• Custom input/linearization capability
• Configurable via a PC or HART Communicator
• T/C Inputs: B, C, D, R, S, E, J, K, L, N, T, U
• RTD inputs: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000
• mV Inputs: -10 to 75mV
• Ohm Inputs: 10 to 2000 ohms
• Outputs: 2-wire, 4-20mA or 20-4mA with optional HART signal superimposed

A highly accurate microprocessor-based temperature transmitter, the 9100D accepts a wide range of inputs, RTDs, Thermocouples, Resistance and Millivolt. Loop-powered and providing 4-20mA and HART output signals, it is configured with a HART Communicator or a PC and our software. The slim DIN rail design allows for several transmitters to be mounted in a small area.

• Low cost
• 0.08% accuracy
• Full input-output isolation
• Custom input/linearization capability
• Configurable via a PC or HART Communicator
• T/C Inputs: B, C, D, R, S, E, J, K, L, N, T, U
• RTD inputs: Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000
• mV Inputs: -10 to 75mV
• Ohm Inputs: 10 to 2000 ohms
• Outputs: 2-wire, 4-20mA or 20-4mA with optional HART signal superimposed